For special assistance, please call us at 262-251-4090.
- Repairs and Refurbishing
- Lifetime Warranty
- Maintenance Plan
- Maintenance Tips
- Repair Form
- Register Your Cue
Billiard AccessoriesWe offer a complete line of accesories to complement all of your billiard and pool cue care needs.
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
||||||||||||||||||||||||||||||||||||
MSRP: $14 each
30-0241 |
MSRP: $24 each
30-0244 |
Navigator chalk is designed to increase friction with the ball, allowing you to generate more spin and maintain better control. MSRP: $26 each
75-NAV-7 |
Amlet primer chalk delivers exceptional performance with its fine, silky particles ensuring a smooth, even application. Perfectly designed to be used alone or as a base for Navigator chalk, it firmly covers the cue tip, minimizing miscues and enhancing precision during high-stakes play. MSRP: $26 each
75-NAV-9 |
||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||
|
75-NAV-8 Navigator Tip Crystal extends the life of your tip by hardening the outer edge. This helps reduce mushrooming. MSRP: $26 each |
75-PMCH Magnetic Chalk Holder $29 Chalk not included. |
||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
||||||||||||||||||||||||||||||||||||
|
75-P04B Metal Joint Protector 3/8"-10 $46 |
$31 |
75-P0Q4 Metal Joint Protector Quick Release $46 |
75-P0Q4-M Metal Joint Protector Quick Release - MALE ONLY $31 |
||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
||||||||||||||||||||||||||||||||||||
|
75-P03B Clover Joint Protector 3/8"-10 $24 |
75-P03B-M Clover Joint Protector 3/8"-10 - MALE ONLY $15 |
75-P0Q3 Clover Joint Protector Quick Release $24 |
75-P0Q3-M Clover Joint Protector Quick Release - MALE ONLY $15 |
||||||||||||||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||||||||||||||||
Billiard Glove
|
|||||||||||||||||||||||||||||||||||||||
| Green: Left Hand | ||
| 75-glove-lh | $33 |
|
| Designed for right-handed players. Glove fits on the left hand. |
||
| Green: Right Hand | ||
| 75-glove-rh | $33 |
|
| Designed for left-handed players. Glove fits on the right hand. |
||
Billiard Glove
Blue
| Blue: Left Hand | ||
| 75-gloveBL-lh | $33 |
|
| Designed for right-handed players. Glove fits on the left hand. |
||
| Blue: Right Hand | ||
| 75-glovebl-rh | $33 |
|
| Designed for left-handed players. Glove fits on the right hand. |
||
Billiard Glove
Purple
| Purple: Left Hand | ||
| 75-glovepu-lh | $33 |
|
| Designed for right-handed players. Glove fits on the left hand. |
||
| Purple: Right Hand | ||
| 75-glovepu-rh | $33 |
|
| Designed for left-handed players. Glove fits on the right hand. |
||
Billiard Glove
Pink
| Pink: Left Hand | ||
| 75-glovepk-lh | $33 |
|
| Designed for right-handed players. Glove fits on the left hand. |
||
| Pink: Right Hand | ||
| 75-glovepk-rh | $33 |
|
| Designed for left-handed players. Glove fits on the right hand. |
||
Youth
Billiard Glove
Left Hand
Designed for right-handed players.
Glove fits on the left hand.
| Youth: Left Hand | ||
| 75-glove-YTH | $16 |
|
| Fits most kids ages 8-12. | ||
Youth
Billiard Glove
Right Hand
Designed for left-handed players.
Glove fits on the right hand.
| Youth: Right Hand | ||
| 75-glove-YTH | $16 |
|
| Fits most kids ages 8-12. | ||
 |
 |
 |
|
75-EXT 11" Cue Extension Adds 11" to cues featuring McDermott's 1/2" weight bolt system! $101  
Additional Weight Bolts for 11" Cue Extension $24 each 
40-0103 Replacement Bumper for 11" Cue Extension $17 each |
75-ENGEXT-11 11" ENGAGE Cue Extension Adds 11" to cues featuring McDermott's new Engage bumper!* $116 *Engage Cue Extension only compatible with cues featuring Engage bumper. The Engage bumper is standard on McDermott H-Series cues. USA-made cues can be retrofitted to have an Engage bumper for $51. |
75-ENGEXT-06 6" ENGAGE Cue Extension Adds 6" to cues featuring McDermott's new Engage bumper!* $105 *Engage Cue Extension only compatible with cues featuring Engage bumper. The Engage bumper is standard on McDermott H-Series cues. USA-made cues can be retrofitted to have an Engage bumper for $51. |
4" Joint Extensions
Extends the length of your cue by 4 inches at the joint!
| Quick Release | 75-JNTEXT-QR | $82 |
|
Approximate weight of 75-JNTEXT-QR: 2.2 oz
| 3/8"-10 | 75-JNTEXT | $76 |
|
The Joint Extension is an aftermarket item. Please note that your cue may not roll perfectly straight with it installed.
Approximate weight of 75-JNTEXT: 2.7 oz
40-0190
Engage Replacement Bumper
RETROFIT for G-Series cues*
Makes G-Series cues compatible with the Engage Cue Extension.
$51
NOTE: Engage replacement bumpers are not compatible with cues using press-fit bumpers without being retrofitted.
*USA-made cues must be sent in to McDermott to be retrofitted to make them compatible with Engage Retrofit bumper. Retrofitting service is free with purchase of Engage Retrofit bumper.
40-0179
Engage Replacement Bumper
Rubber Cap
$11
40-0213
VBP Stabilizer
For Variable Balance Point
weight system in H-Series cues
$11
40-0057
Replacement Bumper
Press-fit
$9
40-0029
Replacement Bumper
Screw-in
$9
75-0125
McMagic Micro Burnishing Papers
$19
Instructions: Cradle the sheet of sand paper around the shaft and stroke using a circular twisting motion. Avoid creating excess heat through friction. Proceed by using the finer grit sheets until the effect of the previous sheet is eliminated.
75-PGLD
Ultra-Glide Shaft Conditioner
$19
75-PRNW
Renew Shaft Cleaner
$19
75-0111
Leather Pad Shaft Conditioner
$15
75-WAX
Silky Smooth Shaft Wax
$15
Instructions: Apply several drops to a clean dry cloth. Apply evenly on shaft. Buff for 30 seconds. Recommended to use after McMagic Micro Burnishing Papers.
Instructions: Sprinkle Shaft Cleaner on a clean, damp cloth. Wipe down cue shaft. Repeat if necessary. Wipe off residue with clean, damp cloth. Use Renew Shaft Cleaner before McMagic Micro Burnishing Papers. Then use Ultra-Glide Shaft Conditioner to seal and polish the shaft.
Instructions: Cradle leather pad shaft conditioner around the shaft and stroke using a circular twisting motion. Avoid creating excess heat through friction.
Instructions: Apply an even coat of wax to a clean shaft using your hand or a soft cloth. Gently wipe off the excess wax with a clean cloth. For best results, use this product after cleaning and burnishing the shaft with McDermott's Renew Shaft Cleaner and McMagic micro-burnishing papers.
40-(weight)
1/2" & 3/4" Weight Bolts for McDermott, Star and Lucky Cues
$13 each
View Weight Bolt Chart
40-TC(weight)
Weight Bolts for McDermott H-Series Cues
VBP Weight System
$29 each
75-8101
Clover Cue Ball
$23
75-8100
Green Clover 8-Ball
$23
75-8113
Cue Shaft Slicker
$11
75-LOGORACK
McDermott Rack
$31
75-LOGOTRBALL
Jump Training Ball
$49
75-GDRK-10
Good Rack Sheet
For 9-Ball & 10-Ball
$33
Gives you a tight 9-ball & 10-ball rack every
time, without interfering with your break!
Comes in a pack of 10.
75-8120
Economy Cue Repair Kit
$14
75-8121
Deluxe Cue Repair Kit
$20
75-8104
Premium Cue Chalk
6 Pack
$11
75-GRWT
Adjustable Weight System
for Element Cues
$10
75-8119
Soft Grip Chalk Holder
w/ Chalk
2 Pack
$9
75-8107
Cue Tip Shaper
$9
75-8126
Deluxe Wood Rail Brush
$14
75-8127
Deluxe Wood Table Brush
$17
75-0128
McGripper
$54
For removing press-fit rubber bumpers on McDermott cues.
75-HTOOL
VBP Adjustment Tool Kit
$26
For adjusting the Variable Balance Point (VBP) weight system in H-Series & Vanquish cues.
40-0162
i-Pro Ferrule
$26
40-0159
i-Shaft Ferrule
$26
40-0172
G-Core Ferrule
$19
40-0019
Traditional Ferrule
$9
